BenQ LK954ST 4K UHD Projector

Comprising over two million micromirrors that reflect pure light through the colour wheel, the DLP chip is hermetically sealed to resist heat for over 20,000 hours without degradation.

24/7 Operations
BenQ laser projectors support 24/7 operation and are suitable for public display applications in museums and exhibitions. Users can choose from three different light-source modes to optimise energy consumption and deliver up to 70,000 continuous hours in Dimming Mode.

Superb Image Quality for Effective Immersion

Optimize Image Quality with 4K Upscaling
LK954ST produces 4K UHD 3840 x 2160 resolution with 8.3 million distinct pixels. To ensure the best image quality, LK954ST adopts cutting-edge 4K Image Upscaling technology off all projected images to a resolution of 4K automatically, which guarantees superb image sharpness and details.

< 17ms Latency for Hyper-Responsive Simulation
System latency, which is the lag time between when an operator applies an input and when the simulator responds with visual and motion cues, is inevitable in simulators. Based on expertise gained from BenQ experience with near-zero latency gaming, LK954ST employs a Fast Mode to provide latency as low as 16.67ms*(@4K 60Hz).

92% Rec.709 Colour Coverage for Optimal Colour Performance
LK954ST’s powerful laser projection utilises a dual colour wheel system to produce unparalleled colour performance that achieves 92% Rec.709 colour coverage. By increasing colour ratios and the purity of RGBY colour, LK954ST dramatically enhances colour saturation to ensure superior presentation quality.

Gamma Selection
Select Gamma for your preference and optimising image quality between input source and picture brightness. Besides, LK954ST also provides advanced BenQ and DICOM Gamma curve to satisfy your various needs.

Flexible Installation in a Compact Fixed-Lens Projector

Short-Throw Design
Fill up a 12-foot-wide screen from less than 10 feet away without casting a shadow.

360° and Portrait Projection
Allow projection onto ceilings, walls, floors or angled signage from any angle.

Zoom Lens and Lens Shift for mounting flexibility
LK954ST features both a 1.1X zoom function and vertical/horizontal lens shift, enabling a fully-aligned image on your screen while moving the image up or down to 60% of the screen height, while adjusting the horizontal position by 23% for an off-axis mounting location. The zoom lens can also enlarge or reduce the image, enabling you to move the mounting position as much as a foot on a 12-foot-wide screen.

2D Keystone and Corner Fit for Ideal Projection Alignment
To counteract the trapezoid effect that can occur when a projector is installed off-centre, BenQ LK954ST offers a two-dimensional keystone correction range up to ±40° on both the horizontal and vertical axes. Corner Fit control can adjust each corner, respectively, for perfectly aligned image geometry.

White Balance Calibration for Seamless Edge Blending
BenQ exclusive out-of-the-box white balance consistency makes images projected from different projectors so consistent that most people cannot see any difference between them, making for seamless and accurate picture quality without distracting discrepancies.

One-click Professional Simulator Settings
One-click Professional Simulator Settings LK954ST is equipped with Simulator Mode, allowing users to activate an array of pre-calibrated settings optimised for high-accuracy professional training with the touch of a button.
*Notice: Turn on Simulator Mode to activate a predefined setup profile. You can recover your settings by turning off Simulator Mode.

High Resolution and Accurate Colour Transmission

HDMI 2.0
HDMI 2.0 cable can handle 18Gbps bandwidth, allowing for 4K 60Hz plus HDR metadata at low latency and faster refresh rates.

DisplayPort
DisplayPort 1.2a enables simultaneous high-bandwidth audio and video transmission. In addition, the dual barbs on the connector provide a friction lock, and an option for a mechanical latch.

S/PDIF
S/PDIF is capable of supporting 5.1-channel surround sound output.

HDBaseT
HDBaseT connectivity combines Video, Audio, RS-232 and LAN signal control signals from multiple sources into a single RJ-45 cable, ensuring seamless transmission from up to 100 meters away.

Centralised Remote Management

BenQ In-house LAN-Based Control System
BenQ DMS Local is Device Information and Management software for use with the Windows operating system that also supports Agent Mode, allowing you to integrate your DMS Local settings with the DMS Cloud.

Network/Web Control
BenQ LK954ST laser projectors are compatible with Creston, AMX and PJ Link control systems for convenient system integration with various third-party components for centralised management of multiple projectors at less cost.